by nixCraft on June 11, 2010 · 1 comment· last updated at June 11, 2010
KVM: Start a Virtual Machine / Guest At Boot Time
KVM Virtualization: Start VNC Remote Access For Guest Operating Systems
Troubleshooting KVM Virtualization Problem With Log Files
KVM Virsh: Redirect FreeBSD Console To A Serial Port
KVM virt-manager: Install CentOS As Guest Operating System
KVM: Starting / Stopping Guest Operating Systems With virsh Command
See what is going on the Linux console screen
Linux KVM: Disable virbr0 NAT Interface
FreeBSD / OpeBSD Running in KVM Does Not Accept FTP Traffic
Unreliable Mouse jumps when using a KVM switch in Linux
This question isn’t very clear. I’ll try to give you an awnesr anyway.When booting from a CD, you are using your CD/DVD drive’s resources to run the OS. The more applications you open, the slower it will run because the resources will be shared.When you install Linux to your hard drive, whether physical or virtual, be sure to allocate plenty of swap space. I’d recommend at least 2 GB, if you intend to do any serious amount of use of the OS. At a minimum, your swap partition should be twice the size of your RAM.Swap is the buffer zone for your RAM. When you exceed your RAM, your computer will use it as though it were RAM, but you should be aware that swap (think of it as hard drive RAM) will rum slower than the RAM that you have installed. If you can upgrade your memory (RAM), your computer will run faster.experience with Linux in several of its distributions Fedora Core 5, Ubuntu, Kubuntu and PCLinuxOS.
Comments on this FAQ are closed. If you'd like to continue the discussion on this topic, you can do so at our forum.