Comments on: Howto Red hat enterprise Linux 5 configure the network card

By: Rachel

Rachel — Thu, 06 Oct 2011 11:02:29 +0000

hello,
am using a dell laptop, i have installed redhat 6 and am trying to configure network settings. please guide me on how to go about it. i have made my machine a dual boot. tell me how i can make ntfs files viewable in redhat?. am new in using redhat

By: Pavithra

Pavithra — Thu, 08 Sep 2011 04:32:57 +0000

How the conflicts in the IP address and systemname will be resolved.Coz I got to know that two systems can take same name which will lead to conflict.Please let me know how this is handled.

By: vilas warade

vilas warade — Tue, 23 Aug 2011 11:44:31 +0000

Thanks & Regards

By: Nocare Munemo

Nocare Munemo — Tue, 26 Jul 2011 10:57:17 +0000

thanks a lot this helped me greatly.

By: Redhat is terrible

Redhat is terrible — Fri, 17 Jun 2011 17:24:19 +0000

Redhat’s archaic and ineffective methods of managing NICs are yet one more reason why you should never ever use Redhat for anything. God forbid you install an OS and shit just works. Redhat is where Linux gets it’s bad rep from.

By: Deepak

Deepak — Sun, 05 Jun 2011 17:00:13 +0000

http://dctechsupp.blogspot.com/
Join this…and ask your question there…They will help you out of your problem..

By: Deepak

Deepak — Sun, 05 Jun 2011 16:52:15 +0000

hey…what type of service(server) are you using…for installation of s/w u can create repository(YUM)..

By: abra

abra — Sun, 05 Jun 2011 16:26:35 +0000

sorry my dear
question as follow?
how i can recognize different between client and server?
how i can shut down client from server?
how i can share file between client and server?
how i can installation software both in server and client?

By: Deepak

Deepak — Sun, 05 Jun 2011 13:33:57 +0000

can you please ask your question in brief???

are you asking for a exam or what…i am not getting you..

By: Deepak

Deepak — Sun, 05 Jun 2011 13:32:40 +0000

Same configuration of slave as master…just in named.conf….you need to write slave instead of master

By: abra

abra — Sun, 05 Jun 2011 08:37:11 +0000

hello my dear i want do configuration and other things as follow in steps
1-different between server and client
2-how to give server permission to client
3-how i know ip address
4-how i shutdown client from server
5- how i install software both in client an server in same time
6-steps of share files
7-how i send message to client from server

By: bharat

bharat — Thu, 12 May 2011 19:50:05 +0000

when in master n slave server we allow a zone transfer so what is the configuration of slave server………?

By: roshanarafath

roshanarafath — Sat, 26 Mar 2011 18:12:01 +0000

this website is very useful. i got lot of help from this website

By: ashwin

ashwin — Mon, 21 Feb 2011 10:45:51 +0000

Hi Saurav,
when you do ifconfig..what you see ?
1. To find the driver details:
At the shell, type :
a) lspci | grep Ethernet
b) dmesg | grep ‘eth0′
2. Once you know the type of card, take a look at /lib/modules/kernelver/kernel/drivers/net and see if you can identify the required driver. For example, if your eth0 device is an Intel PRO/1000 card, you would add the following line to your /etc/modprobe.conf file: alias eth0 e1000 (Again depends what type of card you have).
3. what is the output of this cmd :cat /etc/sysconfig/network-scripts/ifcfg-eth0

By: Deepak

Deepak — Mon, 21 Feb 2011 09:36:38 +0000

Hi Saurav,

Give the ip in the configuration file, and then restart the network service.

Then check whether the ip assigned to it or not.

Otherwise, it means your ethernet card is not working.

By: saurav adhikary

saurav adhikary — Mon, 21 Feb 2011 05:19:25 +0000

i am using linux system but couldnt able to assign the ip address on it. and if assigned ip address it couldnot able to activate ..message shows that wrong device ethernet card name..so how can i find out the ethernet card device details from my system……

By: Deepak

Deepak — Thu, 10 Feb 2011 18:23:50 +0000

Hi,

May be your LAN is not working.

Procedure:

In GUI:

1. Open console->type neat->hit enter->select ethernet card->give ip->then click ok->if it is unable to configure it, then replace your LAN.

Or if it is ok, but LAN is still down:
run this command0–> ifup eth0 (eth0 is your ethernet name)

ot you can give ip in the configuration file.

By: BISHESHWAR KUMAR

BISHESHWAR KUMAR — Thu, 10 Feb 2011 17:38:50 +0000

By: ashwin pawar

ashwin pawar — Tue, 04 Jan 2011 20:23:12 +0000

Very useful article. I truly appreciate your knowledge sharing. A very happy New Year to you & all the visitors on this site.

By: roelf

roelf — Fri, 05 Nov 2010 12:56:24 +0000

Thanks for the info, did a manual config. All worked the first time :)