network switch

Debian Linux: Configure Network Interfaces As A Bridge / Network Switch

by on January 1, 2013 · 4 comments

My server has five Ethernet ports and one ADSL port. How do I setup IPv4 software bridge using Debian Linux operating systems so that the rest of five ports act as a network switch?

{ 4 comments }

Screen Command: Set Baud Rate [ Terminal Communication ]

by on January 27, 2011 · 0 comments

I need to do router or network switch configuration via a console port such as COM1 (ttyS0 under Linux). How do I use the screen command for a serial terminal emulator network with different baud rates under UNIX or Linux operating systems?

{ 0 comments }

FreeBSD Find Out Network Card / Port Speed

by on August 12, 2008 · 2 comments

Q. Under Linux I can use Ethtool and mii-tool, but they are not available under FreeBSD. How do I tell the port speed of the nic under FreeBSD operating system?

{ 2 comments }

How To Run Linux Web Server / Service on Private IP Network

by on March 18, 2008 · 0 comments

Q. I’ve only one public IP address assigned by my ISP using metro Ethernet connection. eth0 has public IP and eth1 is connected to our network switch. How do I configure Linux box to forward traffic to my web server hosted at 192.168.1.100 IP address?

{ 0 comments }