≡ Menu


Ubuntu Linux: Creating ethernet alias for eth0 network device

Q. I am using Ubuntu Linux and I would like to know how to create alias for eth0 so that I can have multiple IP address?

A. To create alias for eth0 use ifconfig command. It is use to configure a network interface and aliases.

Assuming that your eth0 IP is and you would like to create an alias eth0:0 with IP Type the following command:

sudo ifconfig eth0:0 up


sudo /sbin/ifconfig eth0:0 up

Verify that alias is up and running using following two command(s):

ping your-getway-ip

Permanent configuration

Your ethernet configuration is located in a file called /etc/network/interfaces. If you reboot system you will lost your alias. To make it permanent you need to add it network configuration file:

gksudo gedit /etc/network/interfaces


sudo vi /etc/network/interfaces

Append the following configuration:

auto eth0:0
iface eth0:0 inet static
name Ethernet alias LAN card

Save the file and restart system or restart the network:

sudo /etc/init.d/networking restart

Please note that you can also use graphical tools located at System > Administration > Networking menu. Or use the following GUI tool to setup aliases, hostname, dns settings etc:

sudo network-admin

If you want more network aliases, use eth0:1, eth0:2, eth0:N (max upto 254).

See also:

Configure Static Routes In Debian or Red Hat Enterprise Linux

Static routes improves overall performance of your network (especially bandwidth saving). They are also useful in stub networks (i.e. there is only one link to the network). For example, each LAN (located at different offices) is connected to HQ IDC (Internet data center) using single T1/LL/Wan links.

For example under Red Hat/Fedora Linux you can add static router for eth0 network interface by editing /etc/sysconfig/network-scripts/route-eth0 file. Under Debian Linux add static route by editing /etc/network/interface file.

[click to continue…]