fdisk command

As a system admin, I need to use additional hard drives for to provide more storage space or to separate system data from user data. This procedure, adding physical block devices to virtualized guests, describes how to add a hard drive on the host to a virtualized guest using VMWare software running Linux as guest.

It is possible to add or remove a SCSI device explicitly, or to re-scan an entire SCSI bus without rebooting a running Linux VM guest. This how to is tested under Vmware Server and Vmware Workstation v6.0 (but should work with older version too). All instructions are tested on RHEL, Fedora, CentOS and Ubuntu Linux guest / hosts operating systems.

{ 38 comments }

I’ve already written about creating a partition size larger than 2TB under Linux using GNU parted command with GPT. In this tutorial, I will provide instructions for booting to a flat 2TB or larger RAID array under Linux using the GRUB boot loader.

{ 3 comments }

Explains how to setup iSCSI under CentOS / Red Hat Enterprise Linux (ES) 4 server.

{ 3 comments }

Explains how to create filesystems greater than 2 Terabytes under any Linux distribution. How can I create filesystems greater than 2 Terabytes?

{ 66 comments }

Internet SCSI (iSCSI) is a network protocol s that allows you to use of the SCSI protocol over TCP/IP networks. It is good alternative to Fibre Channel-based SANs. You can easily manage, mount and format iSCSI Volume under Linux. It allows access to SAN storage over Ethernet. Open-iSCSI Project Open-iSCSI project is a high-performance, transport […]

{ 53 comments }

If you have, a password protected grub boot loader and you forgot both root and grub password, then you can recover grub-boot loader password using the following method/procedure:

* Use Knoppix cd
* Remove the password from Grub configuration file
* Reboot the system
* Change the root password
* Setup new Grub password if required (optional)

{ 11 comments }