≡ Menu

hard drives

Mega List of low Cost ( Cheap ) Linux / Windows Ultraportables PCs

Check out this awesome post about all tiny device powered by Linux!

Over the past six months or so, Asus, Everex, and HP have managed to bring low-cost ultraportable notebooks to market. But dozens of other computer makers have promised to bring out their own mini-notebooks. Some will run Linux, while others will be preloaded with Windows XP or Vista. Some will have flash memory, while others will have hard drives. But every one will be smaller, lighter, and cheaper than most existing laptop computers. Here's a roundup of some of the computers that have been announced or are already available.

Comprehensive list of low-cost ultraportables (Via digg)

Test If Linux Server SCSI / SATA Hard Disk Going Bad

One of our regular reader sends us a question:

How can I test if my hard disk is going bad? I see few errors in /var/log/messages file.

I/O errors in /var/log/messages indicates that something is wrong with the hard disk and it may be failing. You can check hard disk for errors using smartctl command, which is control and monitor utility for SMART disks under Linux / UNIX like operating systems.
[click to continue…]

Monitoring hard disk health with smartd under Linux or UNIX operating systems

smartd is SMART Disk Monitoring Daemon for Linux. SMART is acronym for Self-Monitoring, Analysis and Reporting Technology (SMART) system built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests.

smartd works with following operating systems:

  1. Linux
  2. *BSD
  3. Windows
  4. Solaris etc

How do I Install smartd?

However, smartd is not installed by default. Following are distribution specific steps to install smartd:

Debian Linux:
# apt-get install smartmontools
Red hat/Fedora Linux:
# rpm –ivh kernel-utils
# up2date kernel-utils
OR if you are using Fedora Linux
# yum kernel-utils
# pkg_add -r -v smartmontools

Before configuring hard disk for SMART monitoring make sure your hard disk is SMART capable:
# smartctl -i /dev/hda

smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device Model:     SAMSUNG SV2002H
Serial Number:    0395J1FR904324
Firmware Version: RA100-04
User Capacity:    20,060,651,520 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 1
Local Time is:    Tue May  2 15:44:09 2006 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
You can configure the smartd daemon by editing the file /etc/smartd.conf. 

In above output the lines:
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Indicates that it is SMART capable and it is enabled.

Configure SMARTD

Debian Linux

  • Enable smart by editing /etc/default/smartmontools file.
  • Smart Configuration file: /etc/smartd.conf
  • Start/Stop smart: /etc/init.d/smartmontools start | stop

Red Hat Linux

  • Enable smart by editing /etc/smartd.conf file.
  • Smart Configuration file: /etc/smartd.conf
  • Start/Stop smart: /etc/init.d/smartd start | stop


  • Enable smart by editing /etc/rc.conf file (add line smartd_enable=”YES").
  • Smart Configuration file: /etc/smartd.conf
  • Start/Stop smart: /usr/local/etc/rc.d/smartd.sh start | stop


You can put following directives in Smart Configuration file:
(a) Send an email to alert@nixcraft.in for /dev/sdb:
/dev/sdb -m alert@nixcraft.in
(b) Read error log:
# smartctl -l error /dev/hdb
(c) Testing hard disk (short or long test):
# smartctl -t short /dev/hdb
# smartctl -t long /dev/hdb

Caution smartd is a monitoring tool not a backup solution. Always perform data backup.

See also:

  • More information on the smarttool see official home page.
  • Read man page of smartd and smartd.conf for configuration help.