≡ Menu

host command

What Is a Content Delivery Network (CDN)?

A CDN (also known as content distribution network) is nothing but a group of servers (system of computers) spread across the globe. The main is to optimizing the flow of digital content (such as css, images, JavaScript, video) and speed up web application to end-users. CDN utilizes advanced software, DNS, storage and networking technologies for organizing your data.
[click to continue…]

My friend wanted to know how to change or convert DHCP network configuration to static configuration. After initial installation, he wanted to change network settings. Further, his system is w/o GUI system aka X Windows. Here is quick way to accomplish the same:

Your main network configuration file is /etc/network/interfaces

Desired new sample settings:
=> Host IP address 192.168.1.100
=> Netmask: 255.255.255.0
=> Network ID: 192.168.1.0
=> Broadcast IP: 192.168.1.255
=> Gateway/Router IP: 192.168.1.254
=> DNS Server: 192.168.1.254

Open network configuration file
$ sudo vi /etc/network/interfacesOR$ sudo nano /etc/network/interfaces

Find and remove dhcp entry:
iface eth0 inet dhcp

Append new network settings:

iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.254

Save and close the file. Restart the network:
$ sudo /etc/init.d/networking restart

Task: Define new DNS servers

Open /etc/resolv.conf file
$ sudo vi /etc/resolv.conf

You need to remove old DNS server assigned by DHCP server:
search myisp.com
nameserver 192.168.1.254
nameserver 202.54.1.20
nameserver 202.54.1.30

Save and close the file.

Task: Test DNS server

$ host cyberciti.biz

Network command line cheat sheet

You can also use commands to change settings. Please note that these settings are temporary and not the permanent. Use above method to make network changes permanent or GUI tool as described below.

Task: Display network interface information

$ ifconfig

Task: Take down network interface eth0 / take a network interface down

$ sudo ifconfig eth0 downOR $ sudo ifdown eth0

Task: Bring a network interface eth0 up

$ sudo ifconfig eth0 upOR$ sudo ifup eth0

Task: Change IP address and netmask from command line

Activate network interface eth0 with a new IP (192.168.1.50) / netmask:
$ sudo ifconfig eth0 192.168.1.50 netmask 255.255.255.0 up

Task: Display the routing table

$ /sbin/route OR$ /sbin/route -n
Output:

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
localnet        *               255.255.255.0   U     0      0        0 ra0
172.16.114.0    *               255.255.255.0   U     0      0        0 eth0
172.16.236.0    *               255.255.255.0   U     0      0        0 eth1
default         192.168.1.254   0.0.0.0         UG    0      0        0 ra0

Task: Add a new gateway

$ sudo route add default gw 172.16.236.0

Task: Display current active Internet connections (servers and established connection)

$ netstat -nat

Task: Display open ports

$ sudo netstat -tulpOR$ sudo netstat -tulpn

Task: Display network interfaces stats (RX/TX etc)

$ netstat -i

Task: Display output for active/established connections only

$ netstat -e
$ netstat -te
$ netstat -tue

Where,

  • -t : TCP connections
  • -u : UDP connections
  • -e : Established

Task: Test network connectivity

Send ICMP ECHO_REQUEST to network hosts, routers, servers etc with ping command. This verifies connectivity exists between local host and remote network system:
$ ping router
$ ping 192.168.1.254
$ ping cyberciti.biz

See simple Linux system monitoring with ping command and scripts for more information.

Task: Use GUI (Graphical Configuration) network Tool

If you are new, use GUI configuration tool, type the following command at terminal:
$ network-admin &

Above command is Ubuntu's GUI for configuring network connections tool.

Final tip - Learn how find out more information about commands

A man page is your best friend when you wanted to learn more about particular command or syntax. For example, read detailed information about ifconfig and netstat command:
$ man ifconfig
$ man netstat

Just get a short help with all command options by appending --help option to each command:
$ netstat --help

Find out what command is used for particular task by searching the short descriptions and manual page names for the keyword:
$ man -k 'delete directory'
$ apropos -s 1 remove

Display short descriptions of a command:
$ whatis rm
$ whatis netstat

Linux offers an excellent collection of utilities, which can be use to finding the files and executables, remember you cannot memorize all the commands and files ;)

Running Commands on a Remote Linux / UNIX Host

You would like to execute a command on a remote Linux/FreeBSD/Solaris/UNIX host and have the result displayed locally. Once result obtained it can be used by local script or program. A few examples:
=> File system and disk information

=> Get user information

=> Find out all running process

=> Find out if particular service is running or not etc

You can use rsh or ssh for this purpose. However, for security reason you should always use the ssh and NOT rsh. Please note that remote system must run the OpenSSH server.

Syntax for running command on a remote host:
ssh [USER-NAME]@[REMOTE-HOST] [command or script]

Where,

  • ssh: ssh (SSH client) is a program for logging into a remote machine and for executing commands on a remote machine.
  • USER-NAME: Remote host user name.
  • REMOTE-HOST: Remote host ip-address or host name, such as fbsd.cyberciti.biz.
  • command or script: Command or shell script is executed on the remote host instead of a login shell.

Examples

(A) Get disk information from a server called www1.cyberciti.biz:
$ ssh vivek@www1.cyberciti.biz df -h

(B) List what ports are open on remote host
$ ssh vivek@www1.cyberciti.biz netstat -vatn

(C) Reboot remote host:
$ ssh root@www1.cyberciti.biz reboot

(D) Restart mysql server (please note enclosed multiple command line arguments using a single or double quotes)
$ ssh root@www1.cyberciti.biz '/etc/init.d/mysql restart'

(E) Get memory information and store result/output to local file /tmp/memory.status:
$ ssh vivek@www1.cyberciti.biz 'free -m' > /tmp/memory.status

(G) You can also run multiple command or use the pipes, following command displays memory in format of "available memory = used + free memory" :
$ ssh vivek@debian.test.com free -m | grep "Mem:" | awk '{ print "Total memory (used+free): " $3 " + " $4 " = " $2 }'

See how to configure ssh for password less login using public key based authentication.

=> Related: shell script to get uptime, disk usage, cpu usage, RAM usage,system load,etc. from multiple Linux servers and output the information on a single server in a html format.