≡ Menu

iscsi target

Linux tgtadm: Setup iSCSI Target ( SAN )

Linux target framework (tgt) aims to simplify various SCSI target driver (iSCSI, Fibre Channel, SRP, etc) creation and maintenance. The key goals are the clean integration into the scsi-mid layer and implementing a great portion of tgt in user space.

The developer of IET is also helping to develop Linux SCSI target framework (stgt) which looks like it might lead to an iSCSI target implementation with an upstream kernel component. iSCSI Target can be useful:

a] To setup stateless server / client (used in diskless setups).
b] Share disks and tape drives with remote client over LAN, Wan or the Internet.
c] Setup SAN - Storage array.
d] To setup loadbalanced webcluser using cluster aware Linux file system etc.

In this tutorial you will learn how to have a fully functional Linux iSCSI SAN using tgt framework.
[click to continue…]

I've received a couple of email about setting up iSCSI under CentOS 4 or RHEL ES 4 server. Previously, I wrote about iSCSI under CentOS 5 / RHEL 5 server.


[a] Following instructions tested on RHEL ES 4 and CentOS 4 only. (See RHEL 5/ CentOS 5 / Debian/ Ubuntu Linux specific instructions here).
[b] You need following information
[c] ISCSI Username
[d] ISCSI Password
[e] ISCSI Server IP / hostname

CentOS Linux v4.x - Install iscsi-initiator-utils

Type the following command:
# yum install iscsi-initiator-utils

Redhat ES Linux v4.x - Install iscsi-initiator-utils

Type the following command:
# up2date iscsi-initiator-utils

Configure iSCSI

Open /etc/iscsi.conf file, enter:
# vi /etc/iscsi.conf
Setup it as follows:


Save and close the file.

Start the iscsi service

Type the following command to start iscsi service so that you can see block device:
# chkconfig iscsi on
# /etc/init.d/iscsi start

Run any one of the following to find out new block device name:
# fdisk -l
# tail -f /var/log/messages
# find /sys/devices/platform/host* -name "block*"

Format iSCSI device

Use fdisk and mkfs.ext3 commands. First, create a partition (assuming that /dev/sdc is a new block device assigned to iscsi) :
# fdisk /dev/sdc
# mkfs.ext3 /dev/sdc1

Create /mnt/iscsi directory:
# mkdir -p /mnt/iscsi
Open /etc/fstab file and append config directive:
/dev/sdc1 /mnt/iscsi ext3 _netdev 0 0
Save and close the file. Mount the parition /dev/sdc1:
# mount -a
# df -H