FreeBSD List / Display Open Ports With sockstat Command

Posted on in Categories FreeBSD, Hardware, Howto, Monitoring, Networking last updated February 8, 2008

You can use traditional netstat / lsof command to lists open Internet or UNIX domain sockets on FreeBSD. FreeBSD comes with a simple and easy to use command called sockstat.
The -4 option only displays IPv4 sockets.

The -6 option only displays IPv6 sockets.

The -c option only displays connected sockets.

The -l option only displays listening sockets (open port).

For example, display IPv4 related open ports, enter:
# sockstat -4 -l

root     sendmail   653   3  tcp4          *:*
root     sshd       647   3  tcp4        *:*
root     ntpd       616   4  udp4   *:123                 *:*

Here the equivalent of netstat:
$ netstat -nat | grep LISTEN
For information read sockstat command man page:
$ man sockstat

Force iptables to log messages to a different log file

Posted on in Categories Iptables, Linux, Monitoring, Security last updated February 23, 2008

According to man page:
Iptables is used to set up, maintain, and inspect the tables of IP packet filter rules in the Linux kernel. Several different tables may be defined. Each table contains a number of built-in chains and may also contain user defined chains.

By default, Iptables log message to a /var/log/messages file. However you can change this location. I will show you how to create a new logfile called /var/log/iptables.log. Changing or using a new file allows you to create better statistics and/or allows you to analyze the attacks.

Iptables default log file

For example, if you type the following command, it will display current iptables log from /var/log/messages file:
# tail -f /var/log/messages

Oct  4 00:44:28 debian gconfd (vivek-4435): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Oct  4 01:14:19 debian kernel: IN=ra0 OUT= MAC=00:17:9a:0a:f6:44:00:08:5c:00:00:01:08:00 SRC= DST= LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=18374 DF PROTO=TCP SPT=46040 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0
Oct  4 00:13:55 debian kernel: IN=ra0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:18:de:55:0a:56:08:00 SRC= DST= TOS=0x00 PREC=0x00 TTL=128 ID=13461 PROTO=UDP SPT=137 DPT=137 LEN=58

Procedure to log the iptables messages to a different log file

Open your /etc/syslog.conf file:
# vi /etc/syslog.conf
Append following line
kern.warning /var/log/iptables.log
Save and close the file.

Restart the syslogd (Debian / Ubuntu Linux):# /etc/init.d/sysklogd restartOn the other hand, use following command to restart syslogd under Red Hat/Cent OS/Fedora Core Linux:# /etc/init.d/syslog restart

Now make sure you pass the log-level 4 option with log-prefix to iptables. For example:
# DROP everything and Log it
iptables -A INPUT -j LOG --log-level 4
iptables -A INPUT -j DROP

For example, drop and log all connections from IP address to your /var/log/iptables.log file:
iptables -A INPUT -s -m limit --limit 5/m --limit-burst 7 -j LOG --log-prefix '** HACKERS **'--log-level 4
iptables -A INPUT -s -j DROP


  • –log-level 4: Level of logging. The level # 4 is for warning.
  • –log-prefix ‘*** TEXT ***’: Prefix log messages with the specified prefix (TEXT); up to 29 letters long, and useful for distinguishing messages in the logs.

You can now see all iptables message logged to /var/log/iptables.log file:
# tail -f /var/log/iptables.log

Updated for accuracy.